ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('VAGHS_10_ASM','2011-05-12T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010140', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010140','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#14005=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#14007=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #14006);
#14008=(CONVERSION_BASED_UNIT('DEGREE',#14007)NAMED_UNIT(#14005)PLANE_ANGLE_UNIT());
#14010=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.001E-2),#14004,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#14011=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #14010))GLOBAL_UNIT_ASSIGNED_CONTEXT((#14004,#14008,#14009))REPRESENTATION_CONTEXT('ID1','3'));
#14012=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#14013=DIRECTION('',(0.E0,0.E0,1.E0));
#14014=DIRECTION('',(1.E0,0.E0,0.E0));
#14017=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#14018=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#14017);
#14019=DESIGN_CONTEXT('',#14017,'design');
#14020=MECHANICAL_CONTEXT('',#14017,'mechanical');
#14021=PRODUCT('VAGHS_10_OBEN','VAGHS_10_OBEN','NOT SPECIFIED',(#14020));
#14022=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #14021,.MADE.);
#14031=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#14032=DIRECTION('',(0.E0,0.E0,1.E0));
#14033=DIRECTION('',(1.E0,0.E0,0.E0));
#14034=AXIS2_PLACEMENT_3D('',#14031,#14032,#14033);
#14035=ITEM_DEFINED_TRANSFORMATION('','',#14015,#14034);
#14036=(REPRESENTATION_RELATIONSHIP('','',#14016,#14028)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#14035)SHAPE_REPRESENTATION_RELATIONSHIP());
#14037=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#14036,#14030);
#34159=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.1011E-2),#14004,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#34160=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #34159))GLOBAL_UNIT_ASSIGNED_CONTEXT((#14004,#14008,#14009))REPRESENTATION_CONTEXT('ID2','3'));
#34161=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#34162=DIRECTION('',(0.E0,0.E0,1.E0));
#34163=DIRECTION('',(1.E0,0.E0,0.E0));
#34166=MECHANICAL_CONTEXT('',#14017,'mechanical');
#34167=PRODUCT('VAGHS_10_UNTEN','VAGHS_10_UNTEN','NOT SPECIFIED',(#34166));
#34168=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #34167,.MADE.);
#34174=CARTESIAN_POINT('',(0.E0,-7.25E1,0.E0));
#34175=DIRECTION('',(0.E0,0.E0,-1.E0));
#34176=DIRECTION('',(-7.660444431190E-1,-6.427876096865E-1,0.E0));
#34177=AXIS2_PLACEMENT_3D('',#34174,#34175,#34176);
#34178=ITEM_DEFINED_TRANSFORMATION('','',#34164,#34177);
#34179=(REPRESENTATION_RELATIONSHIP('','',#34165,#14028)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#34178)SHAPE_REPRESENTATION_RELATIONSHIP());
#34180=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#34179,#34173);
#34187=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-2),#14004,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#34188=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #34187))GLOBAL_UNIT_ASSIGNED_CONTEXT((#14004,#14008,#14009))REPRESENTATION_CONTEXT('ID3','3'));
#34193=DESIGN_CONTEXT('',#14017,'design');
#34194=MECHANICAL_CONTEXT('',#14017,'mechanical');
#34195=PRODUCT('VAGHS_10_ASM','VAGHS_10_ASM','NOT SPECIFIED',(#34194));
#34196=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','LAST_VERSION', #34195,.MADE.);
#34198=PRODUCT_CATEGORY('part','');
#34199=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#34195));
#34201=PRODUCT_CATEGORY('part','');
#34202=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#14021,#34167));
#14004=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#14006=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#14009=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#14015=AXIS2_PLACEMENT_3D('',#14012,#14013,#14014);
#14023=PRODUCT_DEFINITION('design','',#14022,#14019);
#14024=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR VAGHS_10_OBEN.',#14023);
#14027=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR VAGHS_10_ASM.',#34197);
#14029=NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','Next assembly relationship', 'VAGHS_10_OBEN',#34197,#14023,$);
#14030=PRODUCT_DEFINITION_SHAPE('Placement #10', 'Placement of VAGHS_10_OBEN with respect to VAGHS_10_ASM',#14029);
#34164=AXIS2_PLACEMENT_3D('',#34161,#34162,#34163);
#34169=PRODUCT_DEFINITION('design','',#34168,#14019);
#34170=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR VAGHS_10_UNTEN.',#34169);
#34172=NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','Next assembly relationship', 'VAGHS_10_UNTEN',#34197,#34169,$);
#34173=PRODUCT_DEFINITION_SHAPE('Placement #11', 'Placement of VAGHS_10_UNTEN with respect to VAGHS_10_ASM',#34172);
#34197=PRODUCT_DEFINITION('design','',#34196,#34193);
ENDSEC;
END-ISO-10303-21;